I bought this switch some days ago: SW11-2EU (https://fr.athom.tech/blank-1/eu-touch-switch-2-gang)
I have 2 problems with them:
- First problem: After a lot of testing, one of my switches is not working anymore. When I powers it, the Power2 led is RED, the wifi LED blinks at startup and then stay off and the bulb attached to the switch turns on and off at ~1 second interval endless.
How can I reset the switch in order to recoverit ?
I've tried cycling power on/off 7 times as explained in Tasmota documentation, but it didn't work.
- Second problem: I'm unable to get these switches working in "2way" mod. I would like 2 switches being able to poweron/off the same light from different locations.
I think I cannot use Tasmota rules because I need my switches to be powered for this to work and currently if one of my switch is OFF, the other has no power.
I have tried cascading the switches (SwitchA: L=Phase input from power --> L1=connection to "L" of switchB --> SwitchB: L=connection from SwitchA --> L1=phase output to light) but it didn't work either. (there is a capacitor on the light) Should I use an additionnal capacitor for the "connection" between the cascaded switches ?
Thank you for your help