Pre Flashed ESPhome EU Plug , Automatically detect by Home Assistant
Notice:
The plugs shipped after 7th May 2022 are upgraded new version , HLW8032 consumption monitoring chipset build in, NO calibration needed,
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
Build in ESP8285 chipset with 2M flash
Yaml File Download:
https://github.com/athom-tech/athom-configs/blob/main/athom-smart-plug-v2.yaml
Specification:
- Input voltage：100-240VAC 50/60Hz
- Current：16A(Max)
- Power rating：3680W
- Product Size：L51*W51*H85mm
- Standard：EU
- Wireless standard：IEEE802.11b/g/n,2.4GHz
- Housing Color：Whtie
- Operation Temperature：-20℃～+50℃
- Plastic material:ABS+PC
- Fire-protection rating:94-V0
- Package Size：62*62*86mm
- Weight：80g
GPIOs:
GPIO# Component
GPIO3 CSE7766 Rx
GPIO5 Button1
GPIO12 Relay1
GPIO13 LedLinki
The old version ( Shipped before 7th May 2022):
| GPIO# | Component |
| GPIO0 | None |
| GPIO1 | None |
| GPIO2 | None |
| GPIO3 | Button1 |
| GPIO4 | None |
| GPIO5 | None |
| GPIO9 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | LedLink |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Steps to Install :
*Power on the plug
*Use your phone/computer search the SSID: Athom_xxxxxxx
*Connect it and set the SSID and password of your 2.4G WiFI
*Go your Home Assitant find the new device and complete installation