top of page

ESPHome USB Smart Switch, ESP32-C6 2.4 GHz Wi-Fi 6, Home Assistant Bluetooth Proxy, 5V 3A

 

Turn everyday USB-powered accessories into devices you can control from Home Assistant. The ESP32-C6 USB Smart Switch lets you turn a 5V USB light, mini fan, or other compatible accessory on and off from your dashboard, on a schedule, or in response to a sensor.

 

This device comes with ESPHome pre-installed, with the Bluetooth Proxy feature enabled by default. It also supports direct firmware flashing via USB and includes a built-in IEEE 802.15.4 wireless communication module for Zigbee and Thread development.

 

Control USB Power from Home Assistant

Connect the switch to a 5V USB power source and plug your accessory into its output. After adding the switch to Home Assistant through the ESPHome integration, you can control it from your dashboard and use it in scenes, scripts, and automations. 

Use caseExample automation
USB desk lightTurn it on when motion is detected and off after the room is empty.
Mini USB fanStart the fan when a room temperature sensor reaches your chosen threshold.
USB cabinet lightingTurn on the light when a door sensor detects that the cabinet has opened.
Decorative USB lightsTurn them on at sunset and off with your bedtime scene.
USB hobby projectsSwitch a compatible 5V circuit on and off during testing.

For automatic operation, choose accessories that start as soon as USB power is applied.

 

2.4 GHz Wi-Fi 6 with ESP32-C6

The ESP32-C6 supports 2.4 GHz Wi-Fi 6 (802.11ax) and is backward compatible with 2.4 GHz 802.11b/g/n networks. You can use the switch with an existing 2.4 GHz Wi-Fi router and control it locally through Home Assistant.

 

Bluetooth Proxy Enabled by Default

Place the USB switch near compatible Bluetooth Low Energy devices to extend Home Assistant’s Bluetooth coverage. The switch receives BLE data from nearby devices and relays it to Home Assistant over Wi-Fi. Use it with supported devices such as BTHome temperature sensors, door and window sensors, or wireless buttons. 

 

For example, you can connect a USB cabinet light to the switch and install a compatible BTHome contact sensor on the cabinet door. The switch relays the sensor event to Home Assistant, and your automation turns on the light.

 

Direct USB Firmware Flashing

ESPHome is already installed for first-time setup. If you want to customize the configuration or reinstall the firmware, connect the switch to a computer and flash the ESP32-C6 directly over USB. This gives you a wired way to install your own ESPHome build or restore a working firmware image.

 

Zigbee and Thread Hardware Support

The ESP32-C6 includes an IEEE 802.15.4 radio with hardware support for Zigbee and Thread. The factory setup uses Wi-Fi for USB switching and enables Bluetooth Proxy. To use Zigbee or Thread, configure and install compatible firmware for your chosen network. Zigbee requires a compatible coordinator. Thread integration with Home Assistant requires a Thread Border Router.

 

Technical Specifications

FeatureSpecification
Product typeSmart USB Power Switch
Main chipEspressif ESP32-C6 (4MB Flash)
Wi-Fi2.4 GHz Wi-Fi 6 (802.11ax), compatible with 802.11b/g/n
Factory firmwareESPHome preinstalled
Smart home controlHome Assistant via ESPHome
Bluetooth ProxyEnabled by default
Zigbee and ThreadESP32-C6 hardware support with compatible firmware configuration
Firmware flashingDirect USB flashing to the built-in ESP32-C6
USB output voltage5V DC
Maximum output current3A
Maximum output power15W
USB Power Delivery (PD)Unsupported

 

Quick Setup

  • Connect the USB smart switch to a standard 5V USB power source.
  • Connect the switch to your 2.4 GHz Wi-Fi network.
  • Add it in Home Assistant under Settings → Devices & services → ESPHome.
  • Plug in a compatible 5V USB accessory and test the on/off control.
  • Add the switch to a dashboard, scene, or automation. Home Assistant

 

Frequently Asked Questions

What USB devices can I control?
Use 5V USB accessories that draw 3A or less, including compatible LED lights, mini fans, and small DIY devices. Check the accessory’s input rating before connecting it.

 

Does it support USB-C PD power profiles?
USB Power Delivery is unsupported. The switched output is 5V DC, up to 3A.

 

Do I need a Zigbee hub for the standard setup?
The preinstalled ESPHome setup connects to Home Assistant over 2.4 GHz Wi-Fi. A Zigbee coordinator is required only if you configure the device for Zigbee.

 

Can I use USB switching and Bluetooth Proxy at the same time?
Yes. Keep the switch connected to its USB power source to use it as a Bluetooth Proxy while Home Assistant controls power to the attached accessory.

Smart USB Switch For ESPHome

US$17.00 Regular Price
US$11.90Sale Price
Quantity
    bottom of page