Pre Flashed TASMOTA32C3 EU Plug Cosumption monitoring
 
The latest  full version
Fully compatible with official Tasmota OTA server
Pre configed GPIO plug and play
Pre flashed before assembling
Build in ESP32C3 chip with 4M flash
Build in HLW8032 power statistics chip
 
Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible. 
 
HLW8032 consumption monitoring chipset build in, NO calibration needed,
 
The measurement error of active power about 0.2%
The measurement error of effective current is 0.5%
The measurement error of effective voltage is 0.5%
 
Specification:
 
Input voltage：100-240VAC 50/60Hz
Current：16A(Max)
Power rating：3680W
Product Size：L51*W51*H85mm
Standard：EU
Wireless standard：IEEE802.11b/g/n,2.4GHz
Housing Color：Whtie
Operation Temperature：-20℃～+50℃
Plastic material:ABS+PC
Fire-protection rating:94-V0
Package Size：62*62*86mm
Weight：80g
 
Template:
 
{"NAME":"Athom Plug V3","GPIO":[0,0,0,32,0,224,576,0,0,0,0,0,0,0,0,0,0,0,0,0,3104,0],"FLAG":0,"BASE":1}
 
GPIO:
 
GPIO3 ：Button
GPIO5 ：Relay
GPIO6 ：LedLinki
GPIO20：CSE7766 Rx
 
More information for Matter:
https://tasmota.github.io/docs/Matter 
 
Notice:
HLW8032  occasionally report invalid power measurements for load values below 5W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6W.